The MED Connector holds and connects the MED Probe (MEA) to the amplifiers. Thanks to the MED Probe’s lowest-impedance electrodes the MED Connector holding the MED Probe is connected to the amplifier with 2m-long cable, that does not generate signal attenuation. This unique MED64 system configuration will provide the great flexibilities for your experiments.
MED Connector (MED-C03) |
|
MED Probe securing mechanism | Screw down |
Material | Aluminum, Gold plate for contact pins |
Contact resistance | < 30 mΩ |
Printed wiring | 4 layer – 1st, 4th : ground, – 2nd, 3rd : signal line |
Weight | 480 g |
Dimensions | W174 x L150 x H21 (mm) |
MED ThemoConnector (MED-CP04) |
|
---|---|
Connector Unit | |
MED Probe securing mechanism | Screw down |
Material | Aluminum, Gold plate for contact pins |
Contact resistance | < 30 mΩ |
Printed circuit board | 4 layers – 1st, 4th : ground, – 2nd, 3rd : signal line |
Heating device | Transistors (2) |
Temperature accuracy | <+/- 1°C (for solution in the MED Probe) |
Range of verified <1°C accuracy | 32°C – 37°C (RT=25°C) |
Weight | 510 g |
Dimensions | W200 x D20 x D105 (mm) |
Temperature Controller | |
Temperature control unit | OMRON E5GC |
Controlling method | Auto-tuning PID temperature control |
Resolution | 0.1°C |
Power supply voltage | DC ±12V |
Consumption current | +1A, -0.1A (typ.) / +2A (max.) |
Weight | 350 g |
Dimensions | W150 x D110 x H50 (mm) |
Power supply unit, Input | AC 100-240 V (50-60 Hz) |
Power supply unit, Output | DC ±12V |